UPVC Window Handle Replacement

Replacing a damaged window handle is a simple process and UPVC Window Handle Replacement with the right tools it can be done quite quickly. But it's essential to know your handle's type and spindle length before buying a replacement window glass near me.

Older uPVC window handles have a spur that protrudes and locks on a wedge striker. These can be left- or right-handed, and must be matched when replacing.

What kind of lock and handle do I have?

There are a variety of window locks and handles made from upvc, each with its particular advantages and uses. The type of handle that you have will determine whether or not the locking mechanism you have is effective and also if it is simple to open the windows. Over time and through regular use, upvc window handles may become damaged or worn out, making them less secure and effective. In some instances, they could even fall completely off. If you find that your window handles have fallen off, it is crucial to repair them as quickly as possible. This will help prevent potential break-ins and keep your home safe.

The good news is that replacing your window handles made of upvc is a fairly simple job that can be done by almost anyone. You'll require a few basic tools, but with right knowledge, it is simple and should take only a couple of minutes. To begin you must determine the kind of lock and handle you have on your window to help you to find the ideal replacement.

Inline Espagnolette Handles

They are typically found on the side of the window. They are flat and come with a latch which engages the locking mechanism of the window frame. Inline upvc handles also have a spindle that runs through the center of the handle and then into the frame of the window to activate the latch.

Cockspur Handles

They are typically found on older uPVC window frames. They have an unusual hook-shaped design. Cockspur handles are secured to the frame of the window by a single screw and are less secure than other types of window handle.

Tilt and Turn Handles

Unlike the other handles made of upvc the tilt and turn handles can be rotated to open the windows and tilted inwards to allow ventilation. They feature a 7mm spindle at the back and are available in left and right-handed versions.

It is essential to know the size of the spindle when purchasing a replacement handles made of upvc. There are a few that are the exact same size. Drop something in the middle of the hole to check the length. This is the largest spindle size that will fit your windows.

What is spindles?

uPVC window handles work similarly to doors, by turning the handle to operate a latch inside the frame. This opens the window to allow it to be shut and opened. The handles could be damaged, particularly if they're used frequently or exposed to harsh environments. You may need to replace the handles on your uPVC window if they're not able to operate it correctly.

There are many different kinds of uPVC handles available including Espag, Cockspur and Spaded handles. These handles are designed to fit into the uPVC frames in various ways and each handle type has a particular spindle that is used to lock the mechanism to the window. This is why it is essential to know the type of handle you have on your uPVC window to get the correct replacement.

The base of the handle will tell you what kind of uPVC it is. There should be a "snap in cover over one screw that holds the handle base in the correct position. Remove this and then you should be able to see the second holding screw on the opposite side of the base of the handle. Once both screws are removed you should be capable of pulling the handle away from the uPVC window.

After taking off the uPVC handle, carefully remove it from the locking mechanism. Take note of the length of the spindle. You will need to purchase a new one that is the same length as the original handle and the locking device.

The most common issue with uPVC window handle problems is that the handle spindle gets worn out and cannot longer operate the locking mechanism. This can be due to damage caused by constant use, a loosening of the locking mechanism or even corrosion that occurs over time. If this occurs, you will need to replace window handles both the window handle and locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I get rid of the handle from the previous one?

Through time and regular use, window handles can become damaged or broken and if this happens it is essential to fix them as soon as you can to ensure the safety of your home. The good news is that replacing a damaged or worn handle is a fairly easy task that can be completed in less than one minute and doesn't require any specialized tools.

To take off the handle, first remove the screw that is located at the bottom of the handle. Once the screw is removed, the handle will be pulled away. There will be a second screw that is located at the bottom of the handle base, and this can be removed too. After these two screws have been removed, the handle will be removed from the window's base.

Once the old handle is removed, grab the new handle and align the fixing holes with the holes currently in the window frame. If there is a cap or sticker on the new handle, remove it if required and screw the handle into place. It is crucial to verify whether the handle functions after it is installed. Turn the handle and make sure that the lock mechanism is activated.

Espag handles come with an elongated spindle that extends from the handle and slot into a multipoint locking mechanism in the frame of the window. Cadenza windows come with a blade with cut-outs that slot into the lock mechanism while Cockspur handles have a long nose that is able to hook over either the outer frame or transom bar cross member within the window.

Once you have installed the new handle, insert the spindle inside the window lock and tighten it. Once the handle is securely fixated and secured, replace the snap-in cover and the screw cap (if appropriate). Now that the handle is ready for use, open and close the window a few times to make sure that it functions properly and securely.

How do I install the new handle?

It's not difficult to alter the handle on your Upvc windows. The process is easy. You only need a screwdriver and a bit of patience. First, make sure the old handle is unlocked. Then remove any screws visible. You could also replace them with screw caps. After removing the handle it is necessary to take a note of the length of the spindle that protrudes from the back of the handle. This is vital because it will determine the type of handle you need to buy.

Espagnolette handles are the most common type of handle for uPVC windows. They have a spindle that runs through the handle and acts as a locking mechanism within the window frame. The handle releases the latch, allowing the window to open. When used regularly and time, handles made of espagnolette can be damaged.

Cadenza handles are a kind of uPVC handle that is commonly used in tilt and turn windows. They feature a protruding blade that works with a multiple-point locking mechanism inside the window. They are usually more secure than handles made of espagnolette because they can only be opened from the inside. You can replace them with the same method that you would for espagnolette handles however, ensure that the new handle is not angled and flat.

Once you have decided on the correct handle to purchase then you can align the new handle to the existing screw holes and then screw it into place. Then, put the screw covers back on and verify that the new handle is working correctly. You can do this by moving the handle back and forth from the locked position to the unlocked one several times. If you encounter any issues, it could be worth contacting a specialist to see if they are able to assist in resolving the issue. They can advise you on how to solve the issue in a timely and efficient way.