Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they do not rust or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and uPVC window repairs may even be fatal. It is important to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace and will usually fit into the frames of the past easily. If windows with double panes are joined by internal beading, it is difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you're planning to try to remove the glass panes yourself it is important to wear the proper safety gear, including thick gloves and eye protection. It is also a good idea to lay down a drop cloth before you start working on the glass to ensure that any shards fall onto the cloth instead of onto the floor, where they could be trampled upon and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop drafts and water from entering the home until a professional is able to come out and fix the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the distance between the window and the door is large, you might need to consider security screens that includes windows. This will give you the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they may be afflicted by a variety of issues, including sliding. A sagging uPVC window can cause issues with light, draughts and even security. It's crucial to act as soon as you realize that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sliding. You'll first need to open the windows so you can access the frame. With a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure they stay in place.

If you cannot reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to loosen. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles can also loosen up. This is often caused by screws that have been removed over time, but it could be due to the handle mechanism wearing out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need close the window and then perform an initial test to ensure that it fits. The corner joints of the sash must align with the casing joint. If it isn't, you can use a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

It is essential to take action if you awake each day to find mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who has the ability. Based on the severity of the problem the caulking that was used up may require removal before a new layer of caulk can be put on. It is essential to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can reduce the efficiency of your energy.

Verify that the drainage holes do not have debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more extreme situations, you may have to replace the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leak originates from the glass in your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open in a breeze it could be hinges at the fault. They can be repaired by any skilled DIYer and can usually be completed in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. It's very simple to replace a hinge on a window but it's much easier if someone helps you to hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular way or by poor installation at the factory. This issue can be fixed by sending us a photograph on our website. We will be pleased to offer you advice.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is a good way to do this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It also helps prevent corrosion and reduce the possibility of sticking. The ideal time to perform this every year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your upvc window repairs windows.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. Firstly the hinges, again due to wear and tear could become misaligned. This will cause a gap to form where the sash joins the frame. If they're beyond repair, it may be necessary to get them re-aligned. Secondly the interlock, this is on the hinge side of the window, may also be misaligned, and again it is feasible to give them a clean but in certain cases, it may be necessary to have these replaced.

The second most frequent reason for draughts are the window seals. These can become worn down or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and again will reduce the risk of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. They will keep your home warm by blocking out cold air.

Your upvc windows can remain a great source of insulation and security for your home by performing regular maintenance and repairs. However, it is important to recognize that windows last for a certain period of time and eventually, they will reach the point when it's more efficient to replace them than fix them. If you have any problems with your upvc window repairs near me window, it's best to consult a professional immediately.