Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

It is essential to clean and oil UPVC windows and doors regularly. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and may even be fatal. It is important to take the time to ensure that you're doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace and typically fit into frames of the past easily. However when you have Double Glazing Repair Maldon-pane windows that are secured by internal beading, it will be more difficult to remove the existing panes and install new ones. In this situation, you will need to source some plastic spacers that will aid the new pane in being able to fit perfectly into the frame of the window.

If you plan to attempt to remove the window panes by yourself, it is essential to wear appropriate safety gear such as gloves that are thick and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor and could be trampled under.

Once the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional can come out and fix the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap between the window and the door is substantial, you may prefer security screens that includes windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time they may be afflicted by a variety of issues like sliding. A sagging window can cause problems with light, draughts and even security. It is crucial to act when you discover that your uPVC windows are falling down.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll need to open the window so that you can get to the frame. After that, using the screwdriver, you'll be able to remove the hinges on the top and double glazing repair Maldon bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, shut your window and verify the fit. If you are happy with the fit of your window, you can tighten screws to hold them in place.

If you aren't able to move the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to loosen. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. This is usually due to screws that have loosened over time, but it can also be due to the mechanism of the handle wears out. It's fairly simple to fix a loose uPVC handle. First, you'll need to shut the window and then perform an initial fitting. The joints at the corners of the sash should align with the joint on the casing. If it does not you can use a screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how serious the problem is, the old caulking may need to be removed. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This can make your window harder to clean and reduce its energy efficiency.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more serious situations, you may need to think about replacing the window.

Mold spots and rotten sills are also signs of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double glazing repair Dunstable-glazed glass, it is more likely the problem is with the seal rather than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens in an ease. They can be repaired by any skilled DIYer and can usually be completed in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they will wear out over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is easier to do when you have a person to assist in holding the frame in place.

Verify that the uPVC hinges are closed and open in the right direction. Look for the arrows on each hinge to determine which direction the window repairs Dunstable should be opened.

The problem can be caused by opening the window incorrectly or by a poor installation at the factory. This can often be resolved by sending us a photo through our website and we will be pleased to offer you advice.

It is also essential to lubricate the hinges regularly. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, double glazing repair Maldon such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window operate and close more smoothly. It can also reduce the risk of a window sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. First, the hinges because of wear and tear, can become misaligned, this causes gaps to develop where the sash joins the frame. They can be repaired by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to get them re-aligned or replaced. Second, the interlock can be disaligned. This is located on the hinge's side and may need to be cleaned. In certain instances, it may be necessary to replace them.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to stop draughts. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and again will reduce draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric that are filled with some sort of filler and can be positioned on the top of your windowsill. These will keep your home warm by blocking out cold air.

With a little regular maintenance and repairs windows made of upvc will provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows eventually get worn out and it could be more cost-effective to simply replace them than to repair them. If you have any problems with your window made of upvc, it's best to consult a professional as soon as you can.