Double Glazing Lock Repairs

A good quality lock on your windows and doors can stop burglars from getting into your home. They generally don't like breaking glass or trying to wiggle through windows that are not closed.

Some owners of double glazing, however, have experienced problems with their door or window lock after the installation. These issues can usually be fixed without the need for a new double glazing.

Broken or faulty locks

A locksmith can fix your uPVC window lock or door lock if it's damaged or is not working properly. They can repair hinges, striker plates and locks for your double glazing repairs glazing. They can also adjust the cylinder to fix any misalignment that could be causing your handle not to operate correctly.

The mechanism might be jammed when the key fits into the lock, but it will not turn or become difficult for you to insert. This can be caused by dirt or grime getting stuck in the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. It is crucial to apply a dry lubricant such as teflon or graphite instead of oil, which attracts dirt and stick to the interior of the mechanism. After you have lubricated the lock, you need to insert the key and attempt to turn it. The lubricant should make its way through the mechanism, and the lock should be able to rotate without difficulty.

Loose screws within the lock mechanism are another cause of a faulty lock. They can loosen and fall out or break completely, preventing the lock from working correctly. A screwdriver can be used to tighten the screws however, care must be taken not to tighten them too much as this can damage the internal components.

A faulty lock can be dangerous for you and your family, especially if you have small children. They can easily unlock the door without knowing which gives them access to your house. If you're worried that this could occur, a professional locksmith can help you secure the double-glazed doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and broken mechanisms on uPVC doors and windows. We can also alter your uPVC or double glazing locking system to meet your particular requirements, which means that in most cases, replacement windows and doors are not required.

Broken or Faulty Handles

As part of their overall security package many double-glazed windows come with a multipoint lock. This is an excellent option for those who are worried about opportunistic burglars trying to gain entry into their home. Ask your locksmith for antilift locks. They can be put in in addition to existing locks and can ensure that your windows are securely closed.

Handle locks are often damaged or fail. They are the first component that criminals will employ to open your window. Fortunately, the good news is that this is among the most straightforward parts to fix.

Modern uPVC handles as well as aluminium handles are equipped with the multi-point locking mechanism referred to as Espagnolette which is designed to ward off forced entry. This upgrade to security is typically offered as an optional extra on new uPVC window installations. Older style uPVC and aluminum handles can be upgraded to lock systems that shoot bolts also as an optional extra on new double glazed window installations.

It is essential to fix handles as quickly as you can if it's damaged. The damaged handles could stop the window from closing properly and allow a draft to enter. It could also be a vulnerability that opportunistic thieves could exploit and put the belongings of your family and your own at risk.

The process of repairing the damaged mechanism begins with getting access to the frame of the window and then removing the damaged handle. The gearbox is then accessed to determine the type of gearbox that is used to open the handle. This will allow an alternative that is compatible with the profile and internal window frame mechanisms.

After the mechanism is replaced, the handle may be returned to the original screws. We recommend replacing them with larger screws as they will provide the most secure fit. The final step is to apply a coating of clear sealant in order to protect the handle from further rust. Once that's done your window repair, More suggestions, will be functional again and at less than the cost of replacing the entire window.

Hinges that are broken or faulty

If your windows do not close properly, you may suffer from draughts or a weakening of your home's security and an increased risk of water or damp damage. Broken or defective window hinges are a common issue and can be repaired easily.

If your uPVC windows don't open or close and close, it's likely the hinges need to be repaired or replaced. Most window companies will require you to purchase a new window unit to address this issue, but we can replace the hinges to save you money.

Window hinges are often damaged through repeated use, or weakening over time due to corrosion. In the event of a damaged hinge, it is important to take precautions to avoid further damage by being careful not to make the window swing to open or close.

Knowing the type of hinge you have will help you identify the right parts to repair it. Common types of window hinges are Maco, Mila, window repair Roto and a variety of other brands. Consult a professional to avoid purchasing parts that won't fit into your existing hardware. This could cause further damage.

Faulty hinges are a major problem for uPVC doors and windows. They can be an important source of noise and can also permit water to enter your windows.

Check that the pin barrels on both hinge halves are aligned. If not then tap the headpin using the hammer to create a slight bend in the hinge barrel. This will help keep the pin in place. Have a person hold the doors while you take out hinge screws and hinges. Replace the hinges with ones that are the same size and then attach the screws using glue. Finally fix the hinges using weights or clamps while the glue dries.

Once the hinges have been fixed after which you will be able to put back the door and then reattach the handle. It is a good idea to replace the screws with the same length of wood dowels as the screw that was originally used so that they are in line with each the other.

Broken or faulty glass

While uPVC windows do a great job of keeping the cold out and warm in, they are susceptible to becoming damaged over time. This can be the case with broken or damaged glass as well as damaged locks. This is an issue that can be very expensive if not addressed. It can also affect the appearance of your home and can lead to loss of insulation, which is why it's important to repair any damage as soon as possible.

If your glass is broken but isn't shattered, you can usually fix it yourself using the appropriate tools and techniques. Make sure that the area around the broken glass is clear of debris, so that fragments don't cause injury or cause a trip hazard. Then, you must remove any broken pieces and dispose of them properly. Apply masking tape over the entire area. This will stop shards of glass from sticking to your skin and splintering when you move them. Pre-fitting the glass pane prior to gluing it in place is a good idea if you are dealing with a window that has two panes. This will ensure you have enough space to finish your project.

Use a dry, clean cloth to wipe down the glass's surface and the frame before applying the glue. Follow the application and curing instructions that may differ from one product to the next. Based on the direction of the crack, you may want to secure the glass in place during the curing process with lightweight clamps that are designed to hold fragile materials.

After the adhesive has cured, carefully install the glass inside the window frame. Make sure it is flush with the frame edge and that there aren't any gaps between the glass sash and the frame. Be careful to avoid flexing the window while it's put back in place, as this can weaken the seal and lead to condensation and water infiltration.

If you have a glass window that is broken completely or has bigger cracks, call a professional glazier like O'Brien(r) to organise an exchange. Unattended handling of broken glass can be a risk to children and pets and is why it's important to act swiftly.