Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to get rotten or rusty like timber and aluminum.

It is important to clean and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the old frame very easily. If you have double glazing Margate-paned windows that are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance you'll need to source some plastic spacers that will assist the new pane to fit correctly into the frame of the window.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass, so that any shards fall on the fabric rather than on the floor where they could be trodden under and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional comes out and fix the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the distance between the door and the window is significant, you may need to consider an alarm system that has an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they are susceptible to a range of issues, including sliding. A sagging uPVC window could cause issues with light, draughts and even security. It's crucial to act as soon as you realize that your uPVC windows are sagging.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll need open the window so that you can get to the frame. Then, double glazing Margate you can remove the hinges at the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you are happy with the fit of your window, you can tighten screws to hold them in the right position.

If you are unable to move the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to loosen. It is important to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. The majority of the time it is due to screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and perform an experiment fitting. The joint at the corners of the sash should align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it is important that you take action. Water leaks from windows can not only cause destruction of your home's structure but also undermine your efforts to control the temperature within your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the issue the caulking used previously might need to be removed before a new layer of caulk can be put on. It is important to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to keep in mind that if the leak originates from the glass of your double glazing repairs Basingstoke glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. Again this can easily be repaired by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open with a breeze, it may be hinges at fault. They can be easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. It is very easy to replace a hinge on a window but it's much easier if someone helps hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused either by opening the window incorrectly or due to a poor installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to offer advice.

It is also important to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is a good way to do this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also lower the chance of windows sticking and help prevent corrosion. It is recommended to perform this every year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges can also be disaligned as a result of wear, which can cause gaps where the sash meets frame. If they are beyond repair, it could be required to realign them. Second, the interlock can also become misaligned. This happens on the hinge's side and might require to be cleaned. In some instances it is possible to replace them.

The second most frequent reason for draughts are the window seals. They are prone to wear or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and will lessen draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it could be more cost-effective to replace them rather than repair them. If you encounter any issues with your upvc window, it's best to consult a professional as soon as possible.