Window Repairs

Window repairs can help homeowners save money and keep their homes warm. Window replacement may be necessary in the event of severe damage such as broken glass, or a shattered window frame.

Many other problems are fixable to extend the life of windows. The most frequent issues are:

Cracked or broken panes

Cracked windows can be caused by a lawnmowers that throws rocks at the wrong time or branches of trees being blown by strong winds. It's not just visually bad, but it can also lead to higher energy bills as the broken pieces let cold air in to your home. Luckily, Window Repairs it's typically easy to repair windows that have damaged panes.

Start by carefully removing the glass with gloves and safety glasses. You may have to use a utility knife to remove any remaining putty or glazing compound that has accumulated around the edges of the frame. Next, wipe down the surface of the glass and the wood of the frame with a soft cloth or paper towel.

Once the area is clean, apply a waterproof silicone caulking to the perimeter of the frame. This will stop water from getting into the frame through the cracks and result in further damage.

A serious crack in double-paned glass may affect the gas between the panes, which can make your windows less insulative. If the crack is severe enough that it threatens the integrity of the upvc window repairs near me or if the pane inside is not there it is possible to consult a professional.

Cracks in the glass caused by thermal stress may occur when there's an extreme temperature difference inside and outside your home. The glass is then able to expand and shrink. If the cracks are on two sides of a window, it is recommended to replace it rather than try to repair it.

Clear tape can be used to seal cracks in windows that are not yet ready for replacement. It also keeps out cold winds and bugs. You can also cut the length of a nylon stocking to cover the entire crack and glue it with duct tape. This is not an end-to-end solution, but it can keep insects out and cold air away from your home. If you notice cracks on your older windows it is recommended to contact your local company to see if replacing the whole window is the best option.

Rotten Wood

Wood rot is among the most common problems with windows. It can alter the appearance of a home and also pose danger to your safety. It is, window repairs however, possible to fix rotted wood. First, you need to make sure that the root of the rot has been addressed. This can be accomplished by examining for leaks in the roof and gutters that aren't functioning, cracked caulking and any other areas that allow water to enter the wood.

The next step is to take off the rotten parts of the window frame. This can be done with the claw hammer, chisel, or rasp. Once the rotten areas have been eliminated it is time to replace them with new wood. Pre-treated wood is recommended for this project, as it will resist decay. If you are unable replace the rotted wood then you can use wood hardener or filler to repair the damaged area. This type of product will be available at a majority of hardware stores. To get the best results, follow the instructions on the label.

Once you have replaced the rotten areas of the windowsill, it's crucial to safeguard the newly repaired area. Apply a water-resistant sealant to the wood. Sikkens, for example, is a great product to apply.

Use a two-part epoxy to protect the wood from further damage. It is easy to apply and leaves a beautiful finish. It is important to follow the directions on the label. After the epoxy filler is dry, you can sand the wood's surface. Start with a rough sandpaper, then move to a smoother grade.

You do not want to expose the rotted part to more moisture. It is a good idea, so, to cover the repaired surface with an oil-based primer that will protect it from moisture. After that, you can apply the waterproof wood sealant.

The website won't work

A window that isn't opening could be due to many reasons. The house may have settled or the wooden frames could have warped during rainy weather. Someone might have also put them in place to protect themselves. With a bit of patience and the right tools you can open the majority of stuck windows.

Accumulated debris or gunk could be the main cause of the window not opening. Acme Glass notes that dirt and grime builds up over time on the sliding tracks, hinges, and locks. Metal hardware can also rust if it comes into contact with humidity and direct sunlight. Spraying grease on these areas to help to prevent oxidation and ensure that your windows are operating well.

The pulleys that raise or lower the window may be loosened, or break. These components may lose tension and get blocked especially when the window repair is at least two stories above the ground.

If you are having trouble opening the window try using a pry bar to gently force the window to open a bit at one time. Place a block of wood on the frame to give your pry bar more leverage, and be careful not to damage the window or the wood. Alternately, you can run a hair dryer around the edges of the frame for several minutes to warm the wood and assist it to move more easily.

A broken spring could be the cause of windows that don't lift or lower. Based on the manufacturer of the windows, you'll have to consult your owner's manual for further instructions.

If you've tried cleaning and lubricating the moving parts of your windows, but they won’t open, then it may be time to replace windows. Homespire Windows & Doors offers energy-efficient replacement windows. Don't let the windows of your home go from being functional to unusable. If your windows aren't properly shut could leave your home vulnerable for water damage and burglary. Contact us for more information about our windows replacement services and products today!