Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to make sure that you are doing everything you can to keep your windows in good condition.

For single pane windows, it can be relatively simple to replace windows, and the new one is usually able to fit into the frame of the previous one easily. However when you have double glazing repair New Malden-pane windows that are anchored by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this instance, you will need to find some plastic spacers that help the new pane to fit properly into the window frame.

If you're planning attempt to remove the window panes by yourself it is important to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the glass so that any fragments of glass fall onto the fabric rather than on the floor where they could be trampled on and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to block water and drafts from entering the property until a professional comes out and repair the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the distance between the door and the window is substantial, you may need to consider a security screen that also has windows. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, Double Glazing Repairs Dagenham cost-effective and economical alternative to timber sash windows. Over time, they can develop a number of problems, including sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's important to take action as soon as you discover that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sagging. To do this, you'll need open the window to get to the frame. Then, using a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've relocated your hinges. If you are happy with the size of the window, you can tighten screws to hold them in the right position.

If you aren't able to move the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to lose their tightness. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is usually due to screws that have loosened over time, but it can also be due to the handle mechanism getting worn out. It's fairly simple to fix a loose uPVC handle. First, Double Glazing Repairs Dagenham you'll need to close the window and perform a test fitting. The corner joints of the sash need to align with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it is important that you take action. Water leaks from windows are not just a cause for degradation of your home's structure but also hinder your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the issue is, old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce the efficiency of your energy.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the Double glazing repairs Dagenham-glazed glass it is more likely that the issue is more with the seal than the frame. Again this can easily be repaired by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens with an ease. Anyone with the skills to fix them can replace these in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. It's easy to replace a hinge on a window, but it's simpler if you have someone to help hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or a faulty installation at the factory. Sending us a photo through our website can often solve the issue. We are always happy to provide suggestions.

It is also important to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant on the hinges is an ideal method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It also decreases the chance of windows getting stuck and stop corrosion. Ideally, you should do this once a year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. Firstly the hinges, again due to wear and tear could become misaligned. This can cause a gap to form where the sash meets the frame. This can be easily repaired by giving them a good cleaning, but when they're beyond repair, it could be necessary to get them realigned or replaced. Second, the interlock can be unbalanced. This is located on the hinge's side and could require to be cleaned. In certain instances it is possible to replace them.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures and lessen the possibility of draughts.

The final method to cut down on draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. They will keep your home warm by blocking cold air.

With a little maintenance and repairs, your upvc windows will provide an excellent level of security and insulation for your home. It is important to remember that all windows will eventually get worn out and it may be cheaper to replace them rather than repair them. If you are having issues with your upvc windows, it is always best to seek professional assistance as soon as possible.